THE ONLY TWO PIECE LID ON THE MARKET THAT BOTH LIDS OPEN FROM THE INSIDE WITH THE SECOND LID BEING AN EMERGENCY EXIT.
We include a 2-TON HAND WENCH FOR EMERGENCY EXIT.
Our shelters come standard with FOUR REMOVABLE STEEL STEPS.
We use a diamond blade wet saw to cut the concrete so it is a DUST FREE INSALLATION. Installation can be done in new or an existing homes usually within 6 to 8 hours depending on size.
We BACKFILL around the shelters with 5” of READY-MIX CONCRETE.
We have a V-CRIMP IN THE SIDES OF OUR SHELTERS TO ADD STRENGTH to the steel.
Our shelters are WELDED INSIDE AND OUT and are DYE PENTRATE LEAK TESTED inside and out.
Our shelters are coated with COAL TAR EPOXY to help prevent corrosion.
We plant a MAGNESIUM ANODE under each shelter. This draws rust and moisture to the anode instead of the shelter.
Our shelters are MANUFACTURED WITH 10 GAUGE STEEL and the DOORS ARE 1/4" PLATE STEEL.
Our shelters have been IMPACT TESTED AT TEXAS TECH WIND AND SCIENCE INSTITUTE.
Our shelters meet AND EXCEED FEMA STANDARDS.
Our shelters are GPS located for emergency responders.
